00132911_0
TDV-SA-Q-Z/600


00134457_0
Circular diffuser face


00134461_0
White air control blades


00140668_0
Horizontal two-way air discharge


00128810_0
Horizontal one-way air discharge


00140625_0
Horizontal swirling air discharge


00132911_0
00134457_0
00134461_0
00140668_0
00128810_0
00140625_0

TDV-SILENTAIR

WITH VERY LOW SOUND POWER LEVEL FOR COMFORT ZONES AND INDIVIDUALLY MANUALLY ADJUSTABLE AIR CONTROL BLADES

Circular and square ceiling swirl diffusers

  • Nominal sizes 12, 16, 20, 24 in
  • Volume flow rate range 23 - 627 cfm
  • Diffuser face made of galvanized sheet steel, powder-coated
  • For supply and extract air
  • For variable and constant volume flows
  • For all types of ceiling systems, and with an extended border also suitable for freely suspended installation
  • High induction results in a rapid reduction of the temperature difference and airflow velocity
  • Air control blades can be adjusted individually for adjusting the air pattern
  • Ideal for comfort zones


Optional equipment and accessories

  • Exposed diffuser face available in RAL CLASSIC colors, air control blades in black or white
  • Horizontal or vertical duct connection
  • Plenum box with cord-operated damper blade and pressure tap

Application

Application

  • Type TDV-SilentAIR ceiling swirl diffusers are used as supply air or extract air diffusers for comfort zones
  • Attractive design element for building owners and architects with demanding aesthetic requirements
  • Horizontal swirling supply air discharge for mixed flow ventilation
  • The efficient swirl creates high induction levels, thereby rapidly reducing the temperature difference and airflow velocity (supply air variant)
  • Individually adjustable air control blades to meet individual requirements
  • For variable and constant volume flows
  • For supply air to room air temperature differences from –21.6 to +18 °F
  • For room heights up to 13.3 ft (lower edge of suspended ceiling)
  • For all types of ceiling systems
  • With an extended border also suitable for freely suspended installation (supply air variant)

Special characteristics

  • Very low sound power level, ideal for comfort zones
  • Individually manually adjustable air control blades
  • For all types of ceiling systems, and with an extended border also suitable for freely suspended installation
  • Black or white air control blades

Nominal sizes

  • 12, 16, 20, 24

Description

Variants

  • TDV-SA-Q: Square diffuser face
  • TDV-SA-R: Circular diffuser face
  • TDV-SA-*-Z: Supply air
  • TDV-SA-*-A: Extract air


Connection

  • H: Horizontal duct connection
  • V: Vertical duct connection

Parts and characteristics

  • Circular or square diffuser face
  • Diffuser face with individually manually adjustable air control blades
  • Simple installation of the diffuser face due to central fixing screw with decorative cap
  • Damper blade for volume flow rate balancing (optional)

Attachments

  • M: Damper blade for volume flow rate balancing
  • MN: Pressure tap and cord-operated damper blade for volume flow rate balancing with the diffuser face in place

Accessories

  • Lip seal

Construction features

  • Inlet suitable for circular ducts to ANSI/SMACNA 006-2006 and EN 1506 or EN 13180
  • Inlet with groove for lip seal (if accessory lip seal has been ordered)

Materials and surfaces

  • Diffuser face made of galvanized sheet steel
  • V, H: Plenum box and cross bar made of galvanised sheet steel
  • X: Plenum box made of plastic and galvanized sheet steel
  • Air control blades made of plastic, UL 94, V-0, flame retardant
  • Lip seal made of rubber
  • Exposed diffuser face powder-coated RAL 9010, pure white
  • P1: Powder-coated, RAL CLASSIC colour
  • Air control blades for supply air similar to RAL 9005, black; extract air variant without air control blades
  • Q11: Air control blades for extract air similar to RAL 9005, black
  • Q21: Air control blades for supply air and extract air similar to RAL 9010, white

Standards and guidelines

  • Sound power level of the air-regenerated noise measured according to EN ISO 5135

Maintenance

  • Maintenance-free as construction and materials are not subject to wear
  • Inspection and cleaning to VDI 6022

Preuzimanja

informacije o proizvodima

certifikati

priručnici za rad

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Content-Security-Policy"=>"frame-ancestors 'self' https://api.scrivito.com https://punchoutcommerce.com https://www.trox.de https://trox-extern.com https://psp40.onventis.com https://psp22.onventis.com https://trox4u.troxgroup.com", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Kontakt

Tu smo za vas

Preporučite ovu stranicu slanjem poveznice poštom.

Polja označena s (*) su obvezna polja

Podijeli stranicu

Zahvaljujemo na preporuci!

Vaša je preporuka poslana i trebala bi stići uskoro.

Kontakt

Tu smo za vas

Navedite svoju poruku i vrstu zahtjeva
Tel.: +385 1 61 55 401 | +385 1 61 58 598

Polja označena s (*) su obvezna polja.

Kontakt

Zahvaljujemo na vašoj poruci!

Vaša je poruka poslana i ubrzo će biti obrađena.
Naš odjel za servisne zahtjeve što skorije će vas kontaktirati.
Za opća pitanja u vezi s proizvodima ili uslugama možete i nazvati:
Tel.: +385 1 61 55 401 | Faks: +385 1 61 58 598

Kontakt

Tu smo za vas

Navedite svoju poruku i vrstu zahtjeva
Tel.: +385 1 61 55 401 | +385 1 61 58 598

Attachment (max. 10MB)

Polja označena s (*) su obvezna polja.

Kontakt

Zahvaljujemo na vašoj poruci!

Vaša je poruka poslana i ubrzo će biti obrađena.
Naš odjel za servisne zahtjeve što skorije će vas kontaktirati.
Za opća pitanja u vezi s proizvodima ili uslugama možete i nazvati:
Tel.: +385 1 61 55 401 | Faks: +385 1 61 58 598