Application
Special characteristics
Classification
Nominal sizes
Variants
Attachments
Accessories
Mortar-based installation
Construction features
Materials and surfaces
Standards and guidelines
Maintenance
① Installation subframe (subframe and fixing material are supplied separately)
② Spigot
③ Valve cone
④ Flat springs
⑤ Fusible link 72 °C
⑥ Spring (for closure)
⑦ Seal
⑧ Valve disc with seal
⑨ Adjustment device (position 1: large air volume; position 2: small air volume)
⑩ Bayonet fixing
⑪ Extension piece
⑫ Sheet metal cover
⑬ Limit switch, indicating OPEN
⑭ Limit switch, indicating CLOSED
Functional description
In the event of a fire, fire protection valves shut automatically to prevent the propagation of fire and smoke through ductwork to adjacent designated fire compartments.
In the event of a fire, the valve is triggered at 72 °C by a fusible link. The release mechanism is accessible and can be tested from the outside.
Volume flow rate at differential pressure Δpst < 35 Pa (supply air)
Volume flow rate at differential pressure Δpst < 35 Pa (extract air)
Fire protection valve for the isolation of duct penetrations between fire compartments. For use in supply air and extract air systems; with two-stage adjustment device for adjusting the air volume.
Ready-for-operation unit, which includes a fire-resistant valve cone and a release mechanism.
Tested for fire resistance properties to EN 1366-2, with CE marking and declaration of performance according to the Construction Products Regulation.
For mortar-based installation into solid walls and ceiling slabs, and into lightweight partition walls with metal support structure and cladding on both sides.
Casing length 150 mm (300 mm with extension piece)
For the connection to ducts made of non-combustible or combustible materials.
Thermal release at 72 °C.
Special characteristics
Materials and surfaces
|
|
Kontakt
Tu smo za vas
Preporučite ovu stranicu slanjem poveznice poštom.
Podijeli stranicu
Zahvaljujemo na preporuci!
Vaša je preporuka poslana i trebala bi stići uskoro.
Kontakt
Tu smo za vas
Navedite svoju poruku i vrstu zahtjeva
Tel.: +385 1 61 55 401 | +385 1 61 58 598
Kontakt
Zahvaljujemo na vašoj poruci!
Vaša je poruka poslana i ubrzo će biti obrađena.
Naš odjel za servisne zahtjeve što skorije će vas kontaktirati.
Za opća pitanja u vezi s proizvodima ili uslugama možete i nazvati:
Tel.: +385 1 61 55 401 | Faks: +385 1 61 58 598
Kontakt
Tu smo za vas
Navedite svoju poruku i vrstu zahtjeva
Tel.: +385 1 61 55 401 | +385 1 61 58 598
Kontakt
Zahvaljujemo na vašoj poruci!
Vaša je poruka poslana i ubrzo će biti obrađena.
Naš odjel za servisne zahtjeve što skorije će vas kontaktirati.
Za opća pitanja u vezi s proizvodima ili uslugama možete i nazvati:
Tel.: +385 1 61 55 401 | Faks: +385 1 61 58 598