Non-return damper with linkage
Non-return dampers open and close automatically. When the system is in operation, the blades open when air flows. The blade opening angle depends on the differential pressure and the volume flow rate; for variant ARK-1 the opening angle is limited by adjustable blade restrictors. When the system is shut down, the blades close due to their weight. They safely prevent air from flowing against the intended airflow direction.
Nominal sizes | 200 × 345 – 1200 × 1995 mm |
Volume flow rate range | 690 – 23,950 l/s or 2484 – 86,220 m³/h at 10 m/s |
Total differential pressure (horizontal airflow) | 115 Pa at 10 m/s |
Total differential pressure (vertical airflow) | 45 Pa at 10 m/s |
Maximum permissible differential pressure in closing direction | 5000 Pa |
Operating temperature | 0 to 80 °C |
ARK, free cross-sectional area [m²]
H | B | |||||
---|---|---|---|---|---|---|
200 | 400 | 600 | 800 | 1000 | 1200 | |
345 | 0.043 | 0.097 | 0.152 | 0.206 | 0.26 | 0.314 |
675 | 0.088 | 0.198 | 0.309 | 0.419 | 0.529 | 0.639 |
1005 | 0.133 | 0.299 | 0.466 | 0.632 | 0.798 | 0.964 |
1335 | 0.178 | 0.4 | 0.622 | 0.845 | 1.067 | 1.289 |
1665 | 0.223 | 0.501 | 0.779 | 1.058 | 1.336 | 1.614 |
1995 | 0.268 | 0.602 | 0.936 | 1.271 | 1.605 | 1.94 |
Intermediate sizes: Interpolate values between widths.
Quick sizing tables provide a good overview of the volume flow rates with an airflow velocity of 10 m/s. Values for intermediate widths can be interpolated.
ARK, maximum volume flow rate
H | B | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
200 | 400 | 600 | 800 | 1000 | 1200 | |||||||
l/s | m³/h | l/s | m³/h | l/s | m³/h | l/s | m³/h | l/s | m³/h | l/s | m³/h | |
345 | 690 | 2484 | 1380 | 4968 | 2070 | 7452 | 2760 | 9936 | 3450 | 12420 | 4140 | 14904 |
675 | 1350 | 4860 | 2700 | 9720 | 4050 | 14580 | 5400 | 19440 | 6760 | 24336 | 8100 | 29160 |
1005 | 2010 | 7236 | 4020 | 14472 | 6040 | 21744 | 8040 | 28944 | 10050 | 36180 | 12050 | 43380 |
1335 | 2670 | 9612 | 5340 | 19224 | 8020 | 28872 | 10700 | 38520 | 13350 | 48060 | 16000 | 57600 |
1665 | 3330 | 11988 | 6660 | 23976 | 10000 | 36000 | 13300 | 47880 | 16650 | 59940 | 20000 | 72000 |
1995 | 3990 | 14364 | 7980 | 28728 | 11950 | 43020 | 15950 | 57420 | 19950 | 71820 | 23950 | 86220 |
Differential pressure Δpst [Pa]
v [m/s] | Airflow | |
---|---|---|
horizontal | vertical | |
2 | 50 | 135 |
4 | 75 | 125 |
6 | 95 | 105 |
8 | 110 | 65 |
10 | 115 | 45 |
Specification text
Rectangular non-return dampers to prevent air from flowing against the intended airflow direction through fresh air and exhaust air ducts of air conditioning systems.ARK | – | 1 | – | A2 | – | G | / | 600 × 1005 | / | ER | / | P1 – RAL … |
| | | | | | | | | | | | | | ||||||
1 | 2 | 3 | 4 | 5 | 6 | 7 | ||||||
Blade mechanism | Blades with adjustable restrictors |
Material | Stainless steel with aluminium blades |
Construction | Without holes |
Nominal size | 1000 × 1995 mm |
Installation subframe | Without |
User interface | Powder-coated, RAL 7001, silver |
Accessories
ARK-1
H | No. of blades | No. of coupling rods |
---|---|---|
345 | 1 | |
675 | 2 | 1 |
1005 | 3 | 1 |
1335 | 4 | 2 |
1665 | 5 | 2 |
1995 | 6 | 2 |
H | No. of blades | No. of coupling rods | Y |
---|---|---|---|
355 – 505 | 1 | 0 | 5 – 80 |
685 – 835 | 2 | 1 | 5 – 80 |
1015 – 1165 | 3 | 1 | 5 – 80 |
1345 – 1495 | 4 | 2 | 5 – 80 |
1675 – 1825 | 5 | 2 | 5 – 80 |
H | No. of blades |
---|---|
345 | 1 |
675 | 2 |
1005 | 3 |
1335 | 4 |
1665 | 5 |
1995 | 6 |
H | No. of blades | Y |
---|---|---|
355 – 505 | 1 | 5 – 80 |
685 – 835 | 2 | 5 – 80 |
1015 – 1165 | 3 | 5 – 80 |
1345 – 1495 | 4 | 5 – 80 |
1675 – 1825 | 5 | 5 – 80 |
H | B | |||||
---|---|---|---|---|---|---|
200 | 400 | 600 | 800 | 1000 | 1200 | |
345 | 8 | 10 | 12 | 15 | 18 | 21 |
675 | 12 | 16 | 19 | 23 | 27 | 32 |
1005 | 17 | 22 | 26 | 31 | 36 | 41 |
1335 | 22 | 28 | 33 | 39 | 45 | 51 |
1665 | 27 | 34 | 40 | 47 | 54 | 61 |
1995 | 32 | 40 | 47 | 55 | 63 | 71 |
① Even number of holes (hole pitch = 250 mm)
② Uneven number of holes (hole pitch = 250 mm)
ARK, ARK-1, ARK2: width, no. of flange holes
H |
Number of holes n |
---|---|
200 – 287 | 1 |
288 – 537 | 2 |
538 – 787 | 3 |
788 – 1037 | 4 |
1038 – 1200 | 5 |
ARK, ARK-1, ARK2: height, no. of flange holes
H |
Number of holes n |
---|---|
345 – 461 | 2 |
462 – 711 | 3 |
712 – 961 | 4 |
962 – 1211 | 5 |
1212 – 1461 | 6 |
1462 – 1711 | 7 |
1712 – 1961 | 8 |
1962 – 1995 | 9 |
Installation and commissioning
ARKKontakt
Tu smo za vas
Preporučite ovu stranicu slanjem poveznice poštom.
Podijeli stranicu
Zahvaljujemo na preporuci!
Vaša je preporuka poslana i trebala bi stići uskoro.
Kontakt
Tu smo za vas
Navedite svoju poruku i vrstu zahtjeva
Tel.: +385 1 61 55 401 | +385 1 61 58 598
Kontakt
Zahvaljujemo na vašoj poruci!
Vaša je poruka poslana i ubrzo će biti obrađena.
Naš odjel za servisne zahtjeve što skorije će vas kontaktirati.
Za opća pitanja u vezi s proizvodima ili uslugama možete i nazvati:
Tel.: +385 1 61 55 401 | Faks: +385 1 61 58 598
Kontakt
Tu smo za vas
Navedite svoju poruku i vrstu zahtjeva
Tel.: +385 1 61 55 401 | +385 1 61 58 598
Kontakt
Zahvaljujemo na vašoj poruci!
Vaša je poruka poslana i ubrzo će biti obrađena.
Naš odjel za servisne zahtjeve što skorije će vas kontaktirati.
Za opća pitanja u vezi s proizvodima ili uslugama možete i nazvati:
Tel.: +385 1 61 55 401 | Faks: +385 1 61 58 598