VME

Volume flow rate measuring unit VME with attachment XTS/XTD

Volume flow rate measuring unit VME with control components BTD and BTS

VME with control component BTD

Volume flow rate measuring unit VME with control component XTS/XTD

Type VME with control component XTD

Type VME with control component ELAB TCU3

Tested to VDI 6022

VME

For the measurement of volume flow rates in ducts

Rectangular volume flow rate measuring unit for recording or monitoring of volume flow rates

Manual volume flow rate measuring
Continuous volume flow rate measuring
Recording of measured values for other controllers or for the LABCONTROL air management system
Optional effective pressure transducer for the automatic recording of measured values, factory mounted and complete with wiring and tubing
Casing air leakage to EN 15727, up to class D

Optional equipment and accessories

Surface powder-coated, silver grey (RAL 7001)
Dynamic or static effective pressure transducers

General Information

Application

Rectangular volume flow rate measuring unit for the manual recording or automatic measuring of volume flow rates
Simplified commissioning, approval and maintenance
Optional dynamic effective pressure transducer for systems with clean air
Optional static effective pressure transducer for systems with contaminated air

Special features

Suitable for permanent installation because of low differential pressure
High accuracy of volume flow rate measurements

Nominal sizes

39 nominal sizes from 200 × 100 to 1000 × 1000

Construction

Galvanised sheet steel
P1: Powder-coated, silver grey (RAL 7001)

Parts and characteristics

Ready-to-commission unit which consists of mechanical parts and an optional differential pressure transducer.
Averaging effective pressure sensor for volume flow rate measurement

Only for variant with optional differential pressure transducer as add-on part:

Optional differential pressure transducer, factory mounted and wired
Aerodynamic functional testing on a special test rig before shipping of each unit
Set-up data is given on a label or volume flow rate scale affixed to the unit

Attachments

Dynamic effective pressure transducer (BTD, XTD)
Static effective pressure transducer (BTS, XTS)
LABCONTROL: Components for air management systems

Construction features

Rectangular casing
Flanges on both ends, suitable for duct connection
Connection points for effective pressure measuring tubes with 6 mm inside diameter

Materials and surfaces

Galvanised sheet steel variant

Casing made of galvanised sheet steel
Effective pressure sensor made of aluminium

Powder-coated construction (P1)

Casing made of galvanised sheet steel, powder-coated
Differential pressure sensor made of aluminium profiles with powder coating

Standards and guidelines

Meets the hygiene requirements of

EN 16798, Part 3
VDI 6022, Sheet 1
DIN 1946, Part 4
For other applicable standards and guidelines refer to the hygiene certificate

Casing air leakage

EN 15727, class D except B+H ≤ 700, class C

Maintenance

Maintenance-free as construction and materials are not subject to wear

Tehnički podaci

VME with attachment BTD

1: Effective pressure sensor
2: Transmitter (optional add-on part)
3: Casing

The volume flow rate measuring unit is fitted with an effective pressure sensor for measuring the volume flow rate. The effective pressure recorded with this sensor is either measured and evaluated manually, or transformed into an electrical signal by a measuring transducer (effective pressure transducer).

Nominal sizes	200 × 100 – 1000 × 1000 mm
Volume flow rate range	42 – 14246 l/s or 149 – 51289 m³/h
Effective pressure range	approx. 2 – 260 Pa *
Operating temperature	10 to 50 °C
Measurement accuracy	±4 – 13% of the measured value
Maximum differential pressure	1000 Pa

Specification text

Rectangular volume flow rate measuring unit for the measurement of volume flow rates in air conditioning systems, available in 39 nominal sizes. For the manual volume flow rate measuring or for the continuous monitoring of the actual value signal. Ready-to-commission unit which consists of the casing with an averaging differential pressure sensor. Differential pressure sensor with 3 mm measuring holes (resistant to dust and pollution). Meets the hygiene requirements of EN 16798, Part 3, VDI 6022, Sheet 1, and DIN 1946, Part 4.

Special features

Suitable for permanent installation because of low differential pressure
High accuracy of volume flow rate measurements

Materials and surfaces

Galvanised sheet steel construction

Casing made of galvanised sheet steel
Effective pressure sensor made of aluminium

Powder-coated construction (P1)

Casing made of galvanised sheet steel
Surface powder-coated, silver grey (RAL 7001)
Effective pressure sensor made of aluminium

Connection type

Flanges on both ends, suitable for duct connection

Technical data

Nominal sizes: 200 × 100 to 1000 × 1000 mm
Volume flow rate range: 42 – 14246 l/s or 149 – 51289 m³/h
Effective pressure range: approx. 2 – 260 Pa
Operating temperature: 10 to 50 °C
EN 15727, class D except B+H ≤ 700, class C

Equivalence criteria

Declaration of hygiene conformity in accordance with VDI 6022, Part 1 (01/2018), ÖNORM H 6020 (02/2007) and ÖNORM H 6021 (09/2003)
Acoustic data determined in accordance with ÖNORM EN ISO 5135
The test report of the factory-set parameterisation, functional test and adjustment under air by reference measurement on a regularly validated test rig in accordance with DIN EN ISO 9001 is provided

VME	–	P1	/	600 × 400	/	XTD	/	0
\|		\|		\|		\|		\|
1		2		3		4		5

1 Type
VME Volume flow rate measuring unit, rectangular

2 Material
No entry: galvanised sheet steel
P1 Powder-coated RAL 7001 (silver grey)

3 Nominal size [mm]
Specify size (width × height)

4 Attachment
No entry: without attachment
XTD dynamic effective pressure transducer, analogue, display
BTD dynamic effective pressure transducer, analogue, MP bus, Modbus RTU, BACnet MS/TP
XTS static effective pressure transducer, analogue, display
BTS static effective pressure transducer, analogue, MP bus, Modbus RTU, BACnet MS/TP

5 Signal voltage range
For the actual value signal (required only if an attachment has been selected)
0 0 – 10 V DC
2 2 – 10 V DC

Preuzimanja

informacije o proizvodima

Product data sheet VME

VME_PD_2026_01_22_DE_en Product data sheet 720 KB pdf
Product data sheet control component XTS

XTS_PD_2022_02_21_DE_en Poduct data sheet 680 KB pdf

certifikati

Certificate Statement Type VME

Certificate 130 KB pdf
Certificate concerning statistical leakage tests

LC_v2_2024_10_DE_en Certificate 650 KB pdf
Certificate concerning statistical leakage tests

LC_v1_2024_10_DE_en Certificate 660 KB pdf
Declaration of hygiene conformity VME

VME_HC_2024_05_DE_en Certifikcate 1,6 MB pdf
Declaration of incorporation

Declaration of incorporation 66 KB pdf
Non-CE Manufacturer's statement VME

VME_NotCE_2022_02_08_14_43_58_DE_en Certificate 1,2 MB pdf

Klikom na gumb dopuštate nam da vam pružimo izvrsno iskustvo na web mjestu i jednostavne postupke kupnje. Ovi kolačići uključuju one koji su neophodni za rad web stranice i za kontrolu naših usluga i aplikacija, kao i one koje se koriste isključivo u statističke svrhe, za praktične postavke ili za prikaz personaliziranog sadržaja. Možete odlučiti koje kategorije želite dopustiti i možete prilagoditi postavke korištenja podataka na temelju svojih individualnih zahtjeva. Napominjemo da, ovisno o odabranim postavkama, sve funkcije stranice možda neće biti dostupne. Izbor možete promijeniti u bilo kojem trenutku.

TEHNIČKI POTREBNO

Ovi su kolačići neophodni za pravilno funkcioniranje naše web stranice i ne mogu se onemogućiti. Ovi se kolačići u pravilu postavljaju samo kao odgovor na vaše radnje, kao što je postavljanje postavki privatnosti ili punjenje košarice. Uz to su integrirane sigurnosno relevantne funkcionalnosti ili podrška putem namjenskog web chata, uključujući sve kolačiće tvrtke TROX postavljene nakon što se prijavite kao kupac. Možete postaviti svoj preglednik da blokiraju ove kolačiće ili vas o njima obavijeste. Kao rezultat, međutim, neka područja web mjesta možda neće funkcionirati kako je predviđeno.

For the measurement of volume flow rates in ducts

General Information

Tehnički podaci

Preuzimanja

informacije o proizvodima

Product data sheet VME

Product data sheet control component XTS

certifikati

Certificate Statement Type VME

Certificate concerning statistical leakage tests

Certificate concerning statistical leakage tests

Declaration of hygiene conformity VME

Declaration of incorporation

Non-CE Manufacturer's statement VME

TROX Services

TEHNIČKI POTREBNO

STATISTIKA I ANALIZA WEB STRANICE

POGODNOST I PERSONALIZACIJA

ZA NAJBOLJE TROX ISKUSTVO